EPEVER SOLAR Demand CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
EPEVER SOLAR Demand CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Solar Charge Controller is often a very economical solar controller created for off-grid photo voltaic systems. Dependant on multiphase synchronous rectification know-how, it ensures optimized Strength conversion and procedure stability for an array of photovoltaic (PV) apps.
Vital Attributes in the EPEVER Tracer AN Sequence Controller
The Tracer AN collection makes use of EPEVER Photo voltaic Demand Controller technologies for excellent photo voltaic Power harvesting. Critical features contain:
Multiphase Synchronous Rectification (MSR) for improved Electricity conversion.
Superior MPPT Algorithm with >ninety nine% performance.
Twin-Phase Charging for Increased battery lifetime.
Liquid crystal display Screen with true-time details checking.
Various Load Command Modes including manual and timer.
Complete Electronic Protections versus overcharging, around-discharging, shorter circuits, and reverse polarity.
Move-by-Action Guidebook to Establishing the EPEVER Tracer AN Collection Controller
1. Unboxing and Preparing the Controller
Be certain all components are integrated: Tracer AN device, temperature sensor, conversation cables, and user guide.
Verify the product amount and voltage scores match your solar panel and battery specifications.
two. Mounting the Cost Controller
Pick a nicely-ventilated, dry locale near to the battery bank.
Protected the Tracer AN controller using the offered mounting brackets.
Sustain right clearance for heat dissipation.
3. Wiring the Photo voltaic Cost Controller
Caution: Normally observe suitable safety protocols and make sure the technique is powered off right before connecting parts.
Phase one: Connect the battery terminals to the cost controller (good to favourable, adverse to negative).
Move 2: Join the solar panel array to your PV input terminals.
Move 3: Join the load terminals if utilizing a immediate load link.
Step four: Double-Verify all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electrical power over the controller by connecting the battery 1st.
Utilize the LCD display to navigate the options menu.
Configure:
Battery Style: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Handbook, timer, light Management.
five. Checking and Data Logging
The Tracer AN Series supports genuine-time monitoring utilizing the MT50 distant meter.
Knowledge could be logged through the RS485 interaction port making use of program for instance Photo voltaic Station Computer.
Distant monitoring is achievable Using the EPEVER WiFi module.
six. Troubleshooting Widespread Problems
Challenge 1: No Ability Output
Look at battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Problem two: More than-Voltage Security
Verify the photo voltaic array’s voltage rating.
Alter method parameters if important.
Concern three: No Battery Charging
Inspect PV wiring for continuity.
Verify MPPT configurations while in the menu.
Benefits of the Tracer AN Series with MSR Technology
The multiphase synchronous rectification engineering ensures:
Increased Performance: Lowered energy losses for the duration of conversion.
Enhanced Dependability: Secure overall performance beneath variable hundreds.
For a longer time Battery Everyday living: Steady and exact charging profiles.
Conclusion
The visit here EPEVER Solar Cost Controller with multiphase synchronous rectification technology is undoubtedly an Remarkable choice for optimizing solar energy technology and increasing battery life. By adhering to the above mentioned set up guide, consumers can assure maximum efficiency and technique longevity.