EPEVER SOLAR Demand CONTROLLER Set up: TRACER AN Collection CONTROLLE
EPEVER SOLAR Demand CONTROLLER Set up: TRACER AN Collection CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Charge Controller is often a highly effective solar controller created for off-grid photo voltaic devices. According to multiphase synchronous rectification technology, it assures optimized energy conversion and procedure balance for an array of photovoltaic (PV) apps.
Critical Characteristics in the EPEVER Tracer AN Collection Controller
The Tracer AN collection makes use of EPEVER Photo voltaic Demand Controller technology for exceptional solar Power harvesting. Vital characteristics consist of:
Multiphase Synchronous Rectification (MSR) for improved Power conversion.
Innovative MPPT Algorithm with >99% effectiveness.
Dual-Stage Charging for enhanced battery lifestyle.
LCD Show with genuine-time information monitoring.
Several Load Handle Modes like guide and timer.
Extensive Electronic Protections in opposition to overcharging, about-discharging, limited circuits, and reverse polarity.
Action-by-Action Tutorial to Starting the EPEVER Tracer AN Collection Controller
one. Unboxing and Getting ready the Controller
Make certain all elements are involved: Tracer AN device, temperature sensor, conversation cables, and consumer guide.
Confirm the product range and voltage rankings match your solar panel and battery specs.
2. Mounting the Charge Controller
Find a well-ventilated, dry area close to the battery lender.
Protected the Tracer AN controller utilizing the offered mounting brackets.
Preserve proper clearance for warmth dissipation.
three. Wiring the Solar Demand Controller
Warning: Constantly stick to correct protection protocols and make sure the system is powered off ahead of connecting factors.
Move one: Link the battery terminals to the cost controller (good to positive, destructive to destructive).
Phase 2: Join the photo voltaic panel array towards the PV enter visit here terminals.
Action 3: Link the load terminals if employing a immediate load link.
Move four: Double-Verify all connections for polarity and tightness.
four. Configuring the Controller Options
Energy over the controller by connecting the battery initially.
Make use of the Liquid crystal display Exhibit to navigate the settings menu.
Configure:
Battery Style: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Regulate Modes: Manual, timer, gentle Command.
5. Checking and Facts Logging
The Tracer AN Collection supports actual-time monitoring using the MT50 distant meter.
Information is usually logged through the RS485 communication port utilizing program including Photo voltaic Station PC.
Remote checking is possible Together with the EPEVER WiFi module.
6. Troubleshooting Popular Difficulties
Situation one: No Electrical power Output
Check battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Challenge 2: Above-Voltage Security
Verify the solar array’s voltage ranking.
Change program parameters if vital.
Problem 3: No Battery Charging
Inspect PV wiring for continuity.
Validate MPPT configurations within the menu.
Advantages of the Tracer AN Collection with MSR Technologies
The multiphase synchronous rectification technological innovation ensures:
Increased Performance: Decreased Strength losses through conversion.
Increased Trustworthiness: Secure general performance underneath variable masses.
More time Battery Lifetime: Dependable and exact charging profiles.
Conclusion
The EPEVER Solar Cost Controller with multiphase synchronous rectification technology is surely an exceptional option for optimizing solar energy technology and increasing battery life. By following the above mentioned set up manual, buyers can be certain maximum effectiveness and technique longevity.